A full-leather, female-specific, one-piece suit for sport riders

For all the fast female riders out there who want to put down their quickest lap times and continually progress in their development, we bring you the Xena 4 Ladies one-piece suit. A high-tech, track tested, one-piece specifically created for women.

Tailored for the track
Since the Xena one-piece’s inception, a proper tailored fit was at the top of the priority list. It’s hard enough for women to find a suit for them, let alone one that hugs the body in all the right places yet also lets the rider freely move throughout the turns of the track. Through the combination of performance cowhide, strategically placed stretch panels, and the ability to adjust the knee sliders (not only for optimal comfort but for optimal performance), we are able to help women get the most out of their suit.

Ready to race
When throwing down your fastest lap times, you want to feel confident that your safety is accounted for should something happen. We take care of that. The Xena 4 Ladies one piece is prepared for Tech-Air™ airbag system. That said, since the female fitting shape of the suit is smaller in comparison to the men’s suit – and also in relation to stretch panels – we do advise taking the next size up if women will be using the airbag system. Additionally, a host of supplementary safety features (BETAC® elbow, knee, and shoulder protectors), safety seams, and much more all equate to a CE Class AAA certification.

Fit

Tight fit
The Tight fit is designed to be snug and conform to the rider's body shape. The contouring design ensures that the material and fabrics move with the body, without restricting the range of motion in any situation. This fit is mostly found in base layers and in our race-oriented garments.

Pockets

Inner pocket

Lining

Mesh

Polyamide stretch
Comfort and fit-assuring, lining-integrated stretch constructed with durable polyamide.

Removable lining

Features

Calf zipper for easy entrance
This garment has an easy entrance zipper at the calves to more comfortably suit up despite its snug race fit. Simply unzip for extra room when suiting up, then zip it up when you’re ready to go.

Comfort collar
The comfort collar is added to products to offer more comfort in crucial places. An extra soft fabric is used for a cozy finish.

Comfort cuffs

Cuff zipper
The zipper at the cuff has several purposes. It allows for easier entry into the sleeve, provides extra ventilation on warm days, and allows you to easily wear the glove cuff under your outer shell and over your base layer.

Soft edge at collar

For extra comfort, the inside of the collar is covered with a soft fabric.

Speed hump
Stretchable cuff

Stretch at ankle
The stretch at the ankle of this garment allows for more freedom of movement

and comfort when being worn, as well as easy on/off.

Stretch at armholes
Stretch at calf
Stretch at crotch
Stretch at front
Stretch at inside arms
Stretch at shoulders
Stretch lips at knees
Stretch lips at shoulders
Wind catcher behind front zipper

Ventilation

Ventilation panels on back side
The ventilation panels on this garment allow for optimal airflow to keep the body cool while riding.

Ventilation panels on lower arms
The ventilation panels on this garment allow for optimal airflow to keep the body cool while riding.

Ventilation panels on upper legs
The ventilation panels on this garment allow for optimal airflow to keep the body cool while riding.

Ventilation panel on centre front

Protection

BETAC® elbow protectors "E" Type A-L1
This product includes the impact-absorbing BETAC® elbow protectors "E" Type A-L1. “E” which stands for elbows – the region of the body of which it protects, Type A referring to its surface area in which it covers (which is a smaller surface area in comparison to the Type B variant), and L1 which stands for CE-level 1 certification.

BETAC® knee protectors "K+L" Type A-L1
This product includes the impact-absorbing BETAC® knee protectors "K+L" Type A-L1. “K+L” stands for knee and lower leg – the region of the body of which it protects, Type A referring to its surface area in which it covers (which is a smaller surface area in comparison to the Type B variant), and L1 which stands for CE-level 1 certification.

BETAC® shoulder protectors "S" Type A-L1
This product includes the impact-absorbing BETAC® shoulder protectors "S" Type A-L1. “S” which stands for shoulders – the region of the body of which it protects, Type A referring to its surface area in which it covers (which is a smaller surface area in comparison to the Type B variant), and L1 which stands for CE-level 1 certification.

Coccyx Protection

Ready for Avertum Tech-Air® airbag system - ONE SIZE UP
Under this garment you can wear our REV'IT! Avertum Tech-Air® Airbag - or a Tech5 airbag - if you purchase the garment one size bigger than your usual size. If you wish to wear a garment that is marked as ""Ready for Avertum Tech-Air® airbag system"", you must be sure that the garment can accommodate the expansion of the airbag and therefore we recommend following below fit equation: 1. Measure chest circumference and divide the measurement by two; 2. Measure garment flat on chest line; 3. If the difference between point 1 and point 2 is 12 centimeters or bigger the garment is suitable to wear on top of the airbag. Note: Please keep in mind that the garment should be purchased in the correct size in order for the shoulder and elbow protection to fit properly and best protect you in case of a crash. In order to create space for the expansion of the airbag, you can remove all separate layers (thermal liners, water proof liners) that can restrict the expansion of the airbag in the event of a crash. Remove the separate back protector in your garment, if any, when wearing the airbag (a back protector is included in the airbag) and adjust all adjustment straps on body to the widest position.

Prepared for SEESOFT CE-level 2 Insert Back Protector
The back protector pocket in this REV'IT! garment is tailor-made to accommodate the SEESOFT CE-level 2 back protector insert Type RV - an easy upgrade to maximize safety.

Safety seams
The stitching in motorcycle garments contributes greatly to the abrasion resistance of the total gear. This is why REV'IT! uses safety seams on garment areas at increased risk of impact. Safety seams have a visible as well as an invisible seam. This construction keeps the material of the outer shell together, even when the visible seam is thorn.

SEESMART CE-level 1 Hip Protectors

TPU elbow sliders
TPU protection at knees
TPU protection at shoulder

Outer shell material

3D air mesh
This knitted fabric has an open, 3-dimensional structure that ensures good ventilation while riding. 3D air mesh is a must-have for long touring riders.

Artificial Leather
A synthetic version of leather with a similar look.

Artificial nubuck

Cowhide
Cowhide has been used in this garment for optimal fit and protection.

Neoprene
Neoprene is a synthetic rubber useful for protective gear. It is abrasion-resistant, chemical-resistant, waterproof, somewhat stretchable, and buoyant.

Perforated cowhide
PWR|Shell stretch

Visibility

Laminated reflection on back
Reflection panels ensure excellent visibility at all angles, allowing the wearer to be seen from all directions. To offer a more sophisticated look, the reflection panels are welded to the fabric.

Ladies One-Piece